研發成果 Research
期刊論文
2. P.K. Wu, W.C. Tsai, H.W. Wang, C.L. Lin*, Establishment of design guidelines for patient-specific 3D-printed reconstruction implants for large distal femoral defects, Materials & Design, 251, 113668, 2025. (SCI, Material science, multidisciplinary:80/439=18.22%, IF=7.6)
3. H.W. Chen, C.H. Chen, Y.J. Fan, C.Y. Lin, W.H. Hsu, I.C. Su, C.L Lin, Y.C. Chiang, H.M. Huang, CFD study of the effect of the angle pattern on iliac vein compression syndrome, Bioengineering (Basel), 5;10(6):688, 2023. (SCI, Category: Engineering, Biomedical: 44/123=35.77%, IF=3.8)
4. C.Y. Liao, S.F. Huang, W.C. Tsai, C.Y. Chang, C.L. Lin*, Biomechanical comparison of using traditional and 3D-printed titanium alloy anatomical assembly thin anterior plating under three patellar fracture conditions, Virtual Physical & Prototyping, 19, NO. 1, e2404982, 2024. (SCI, Category: Engineering, Manufacturing: 5/68=7.35%, IF=10.2)
5. K.W. Wong, H.W. Wang, C.S. Chien, C.H. Li, C.B. Li, C.L. Lin*, Development and verification of a novel bone collector with automatic size separating function for orthopedics surgery, Expert Review of Medical Devices, 17:1-8. 2024. (SCI, Category: Engineering, Biomedical: 65/123=52.84%, IF=2.9)
6. K.W. Wong, Y.S. Chen, C.L. Lin*, Evaluation optimum ratio of synthetic bone graft material and platelet rich fibrin mixture in a metal 3D printed implant to enhance bone regeneration, Journal of Orthopaedic Surgery and Research, 19: 299, 2024. (SCI, Category: Orthopedics: 34/136=25%, IF=2.8)
7. T.H. Huang, S.F. Huang, L.Y. Yu, C.L. Lo, Y.P. Chang, C.L. Lin*, Novel patient-specific gingival soft-tissue expander development for large bone defects using silicone 3D-printing technology, International Journal of Bioprinting, 2918; 2024. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
8. C.H. Wu, H.K. Wu, P.J. Tsai, C.L. Lin*, Early monitoring for 3D-printed patient-specific mandible reconstructive implant biomechanical behavior under different occlusal conditions using a wireless module system, International Journal of Bioprinting, 2553; 2024. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
9. H.W. Wang, C.H. Chen, K.H. Chen, Y.H. Zeng, C.L. Lin*, Designing a 3D-printed medical implant with mechanically macrostructural topology and microbionic lattices: a novel wedge-shaped spacer for high tibial osteotomy and biomechanical study, International Journal of Bioprinting, 10(1), 1584, 2024. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
10. C.S. Wang, H.W. Wang, K.C. Chen, C.L. Lin*, Biomechanical analysis of tibial plateau posterolateral fracture fragment fixation and introduction of a lateral tibia plateau hook plate system, Journal of Orthopedic Science, 29: S0949 2658(23)00181-1, 2023. (SCI, Category: Orthopedic: 56/86=0.651, IF=1.7)
11. C.Y. Liao, S.F. Huang, W.C. Tsai, Y.H. Zeng, C.H. Li, C.L. Lin*, Biomechanical evaluation of an anatomical bone plate assembly for thin patella fracture fixation fabricated by titanium alloy 3D printing, International Journal of Bioprinting, 9(6), 0117, 2023. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
12. P.L. Lai, C.M. Chang, S.F. Huang, P.H. Liu, C.L. Lin*, Designing an anatomical contour titanium 3D-printed oblique lumbar interbody fusion cage with porous structure and embedded fixation screws for patients with osteoporosis, International Journal of Bioprinting, 9(5), 445-458, 2023. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
13. Y.H. Chao, Y.C. Chou, C.L. Lin*, The deformities of acute diaphyseal clavicular fractures: a three-dimensional analysis, BioMedical Engineering OnLine, 22, 42, 2023. (SCI, Category: Engineering, Biomedical: 65/123=52.85%, IF=2.9)
14. Y.T. Wang, C.M. Chang, P.H. Liu, C.L. Lin*, Feasibility evaluation of a new lattice for porous surface design in additive manufacturing medical implants under interfacial tensile bonded testing, Additive Manufacturing, 66(25): 103455, 2023. (SCI, Category: Engineering, Manufacturing: 4/68=5.88%, IF=10.3)
15. C.T. Tang, T.T. Chung, H.C. Liang, C.L. Lin*,“Biomechanical evaluation of a novel tri-blade titanium implantable vertebral augmentation device”, Spine Journal, 23 (5), 766-779, 2023. (SCI, Category: Orthopedic, 5/136=3.68%, IF=4.9)
16. S.F. Huang, C.M. Chang, C.Y. Liao, Y.T. Chan, Z.Y. Li, C.L. Lin*, Biomechanical evaluation of an osteoporotic anatomical 3D printing posterior lumbar interbody fusion cage with internal lattice design based on weighted topology optimization, International Journal of Bioprinting, 9(3), 697, 2023. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
17. Y.H. Chao, Y.C. Chou, C.L. Lin*, Fracture edge features of diaphyseal clavicular fractures: a morphologic study, Journal of Shoulder and Elbow Surgery, 32(1):192-200, 2023. (SCI, Category: Orthopedic: 22/136=16.18%, IF=2.9)
18. K.W. Wong, T.H. Yang, S.F. Huang, Y.J. Liu, C.S. Chien, C.L. Lin*, Biomechanical evaluation of a novel tibiotalocalcaneus nail with trilobular cross-sectional design and self-compression effect, Computer Methods and Programs in Biomedicine Update, 2, 100072, 2022.
19. C.Y. Liao, C.L. Chien, T.W. Pu, S.C. Shen, C.Y. Yang, C.H. Yen, C.L. Lin*, Assessment of Lumbar Vertebrae Morphology 1 附件一 by Computed Tomography in Older Adults with Osteoporosis, Current Medical Imaging, 18: 11, 1195 – 1203, 2022. (SCI, Category: Radiology, nuclear medicine & medical imaging153/204: 153/204=75.0%, IF=1.1)
20. C.H. Chen, W.J. Chang, Y.S. Chen, K.H. Chen, S.F. Huang, H.R. Hsueh, C.B. Li, C.L. Lin*, Development of a novel hybrid suture anchor for osteoporosis by integrating titanium 3D printing and traditional machining, International Journal of Bioprinting, 8, 4, 161-171, 2022. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
21. Y.C. Hunag, C.M. Chang, S.F. Huang, C.H. Hong, C.L. Lin*, Development and biomechanical evaluation of an anatomical 3D printing modularized proximal inter-phalangeal joint implant based on the CT image reconstructions, International Journal of Bioprinting, 8, 3, 151-162, 2022. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
22. C.L. Lin*, Y.T. Wang, C.M. Chang, C.H. Wu, W.H. Tsai, Design criteria for patient-specific mandibular continuity defect reconstructed implant with lightweight structure using weighted topology optimization and validated with biomechanical fatigue testing, International Journal of Bioprinting, 2021 Dec 10;8(1):437. (SCI, Category: Engineering, Biomedical: 17/123=13.82%, IF=6.8)
23. P.K. Wu, C.W. Lee, W.H. Sun, C.L. Lin*, Biomechanical analysis and design method for patient-specific reconstructive implants for large bone defect of the distal lateral femur, Biosensors, 12, 4, 2022. (SCI, Category: Instrument & Instrumentation: 13/76=17.11%, IF= 4.9)
24. H. C. Liu, Y.H. Zeng, C.L. Lin*, Mechanical comparison of a novel hybrid and commercial dorsal double plating for distal radius fracture: in vitro fatigue four-point bending and biomechanical testing, Materials, 14, 6189, 2021. (SCI, Category: Metallurgy & Metallurgical Engineering: 20/90=22.22%, IF=3.1)
25. H.Y. Liu, J.H. Chen, K.J. Hsu, C.T. Yao, P.H. Chen, S.Y. Hsiao, C.L. Lin*, Decreased tongue pressure associated with aging, chewing and swallowing difficulties of community-dwelling older adults in Taiwan, Journal of Personalized Medicine, 11, 653, 2021. (SCI, Category: Health Care Sciences & Services - SCIE: 39/175=22.28%, IF=3.0)
26. H.Y. Liu, C.H. Chen, C.H. Kuo, M.C. Feng, J.H. Chen, H.W. Wang, K.C. Chen, C.L. Lin*, A novel tongue pressure measurement instrument with wireless mobile application control function and disposable positioning oral mouthpiece, Diagnostics, 11(3), 489, 2021. (SCI, Category: Medicine, General & Internal:59/329= 17.93%, IF=3.0)
27. C.H. Wu, K.C. Chen, Y.S. Lin, Y.C. Liu, C.L. Lin*, Functional evaluation of a novel multi-axial alveolar distractor - preliminary in vivo animal study, Applied Sciences, 11(4), 2021. (SCI, Category: Engineering, Multidisciplinary: 44/181=24.31%, IF=2.5)
28. K.W. Wong, C.D. Wu, C.S. Chien, C.W. Lee, T.H. Yang, C.L. Lin*, Patient-specific 3-dimensional printing titanium implant biomechanical evaluation for complex distal femoral open fracture reconstruction with segmental large bone defect: a nonlinear finite element analysis, Applied Sciences, 10, 4098, 2020. (SCI, Category: Engineering, Multidisciplinary: 44/181=24.31%, IF=2.5)
29. L.J. Wu, K.H. Hsieh, C.L. Lin*, Integrating finite element death technique and bone remodeling theory to predict screw loosening affected by radiation treatment after mandibular reconstruction surgery, Diagnostics, 10, 844, 2020. (SCI, Category: Medicine, General & Internal:59/329= 17.93%, IF=3.0)
30. S.H. Chang, H.I. Mei, C.L. Lin*, Integrating CAD and 3D-printing techniques to construct an in vitro laser standard treatment platform for evaluating the effectiveness of sterilization by Er:YAG laser in peri-implant intra-bony defects, Applied Sciences, 10(10), 3431, 2020. (SCI, Category: Engineering, Multidisciplinary: 44/181=24.31%, IF=2.5)
31. H. C. Liu, J.S. Jiang, C.L. Lin*, Biomechanical investigation of a novel hybrid dorsal double plating for distal radius fractures by integrating topology optimization and finite element analysis, Injury- International Journal of the Care of the Injured, 51 (6), pp.1271-1280, June 2020. (SCI, Category: Emergency Medicine: 14/54=25.93%, IF=2.2)
32. M.D. Jeng, Y.S. Lin, C.L. Lin*, Biomechanical Evaluation of the Effects of Implant Neck Wall Thickness and Abutment Screw Size: A 3D Nonlinear Finite Element Analysis, Applied Sciences, 10(10), 3471, 2020. (SCI, Category: Engineering, Multidisciplinary: 44/181=24.31%, IF=2.5)
33. C.H. Li, C.H. Wu, C.L. Lin*, Design of a patient-specific mandible reconstruction implant with dental prosthesis for metal 3D printing using integrated weighted topology optimization and finite element analysis, Journal of the Mechanical Behavior of Biomedical Materials,105, 103700, 2020. (SCI, Category: Engineering, Biomedical:53/123=43.09%, IF=3.3)
34. Y.T. Wang, C.H. Chen, P.F. Wang, C.T. Chen, C.L. Lin*, Design of a metal 3D printing patient-specific repairing thin implant for zygomaticomaxillary complex bone fracture based on buttress theory using finite element analysis, Applied Sciences, 10(14), 4738., 2020. (SCI, Category: Engineering, Multidisciplinary: 44/181=24.31%, IF=2.5)
35. Y.Y. Hsieh, F.Y. Tsuang, Y.J. Kuo, C.H. Chen, C.J. Chiang, C.L. Lin*, Biomechanical analysis of single-level interbody fusion with different internal fixation rod materials: A finite element analysis, BMC Musculoskeletal Disorders, 21, Article number: 100. 2020 (SCI, Category: Orthopedics:42/136=30.88%, IF=2.2)
36. Y.Y. Hsieh, Y.J. Kuo, C.H. Chen, L.C. Wu, C.J. Chiang, C.L. Lin*, Biomechanical assessment of vertebroplasty combined with cement-augmented screw fixation for lumbar burst fractures: a finite element analysis, Applied Sciences, March 10(6): 2133 2020. (SCI, Category: Engineering, Multidisciplinary: 44/181=24.31%, IF=2.5)